Electrical Inspection & Compliance Course:– From Standards to Field Execution

 

Course Title

Practical Electrical Inspection & Compliance – From Standards to Field Execution

---

Course Overview

This course is designed to equip engineers, inspectors, and technicians with the knowledge and skills to carry out electrical inspections, ensure compliance with national and international standards, and maintain the safety, reliability, and efficiency of electrical systems.
You will learn inspection procedures, testing methods, documentation, and compliance requirements for residential, commercial, and industrial installations.
The training combines theoretical knowledge with practical field applications to make you job-ready.

---

Target Audience

• Electrical engineers & supervisors
• QA/QC inspectors
• Safety officers & auditors
• Electrical contractors & site engineers
• Professionals preparing for inspection-related roles in EPC & manufacturing

---

Course Objectives

By the end of this course, learners will be able to:

• Perform electrical inspections as per IEC, IEEE, IS, and NEC standards
• Identify and report non-compliance issues
• Execute preventive & corrective measures
• Prepare inspection reports & compliance documentation
• Improve overall electrical safety and system performance

---

Course Curriculum

Module 1 – Fundamentals of Electrical Inspection

1. Importance & objectives of electrical inspection
2. Roles & responsibilities of an inspector
3. Types of inspections – initial, periodic, preventive, and special inspections
4. Overview of common electrical faults & hazards

---

Module 2 – Standards & Compliance Requirements

1. Overview of IEC, IEEE, NEC, and IS codes
2. Legal & statutory compliance in electrical installations
3. Safety standards & OSHA requirements
4. Risk assessment and hazard identification

---

Module 3 – Inspection Tools & Instruments

1. Multimeters, clamp meters, and insulation testers
2. Earth resistance testers & loop impedance testers
3. Thermal imaging cameras
4. HV test kits (AC/DC, Tan Delta, IR)
5. Calibration of instruments

---

Module 4 – Inspection Procedures for Installations

1. Residential & commercial electrical inspection checklists
2. Industrial electrical system inspection
3. Switchgear & panel board inspections
4. Transformer & motor inspection procedures
5. Cable inspection – laying, terminations, and joints

---

Module 5 – Testing Methods & Analysis

1. Continuity and insulation resistance testing
2. Earth resistance & ground fault testing
3. Voltage drop & load testing
4. Protection relay testing
5. Functional testing of control circuits

---

Module 6 – Reporting & Documentation

1. Inspection forms & checklists
2. Compliance reporting format
3. Non-conformance reports (NCR) & corrective action plans
4. Record keeping & audit preparation

---

Module 7 – Practical Case Studies

1. Transformer inspection & fault diagnosis
2. Switchgear maintenance & inspection findings
3. Site visit checklist – sample walkthrough
4. Root cause analysis of electrical failures

---

Module 8 – Final Assessment & Certification

1. Hands-on inspection simulation (virtual or real)
2. Final assessment test
3. Certification of completion

---

Key Deliverables

✅ Certificate of Completion
✅ Inspection templates & checklists
✅ Standards reference documents
✅ Practical project assignments

 

44.  Electrical Inspection & Compliance Course:– From Standards to Field Execution

 -----Buy Now Link for Indian Origin Engineer 

 -----Buy Now Link for Overseas Engineer

   Course Details                  Download Sample eBook